Products

1. Female thread 113mm PDC bit with 50mm thread use for mining and water drilling;
2. We also supply 75mm, 94mm, 133mm, 153mm, 175mm, 215mm and customized sizes;
3. We accept sample order and supply quality goods with competetive price.

1. PDC anchor shank drill bit adopts new and superhard raw material to produce;
2. Its service life is 10 times than carbide anchor bit.
3. It has good durability and high impact toughness in the working process, thus can improve the drilling efficiency.

1.PDC Reaming bit diamond expanding drill bit is a patent product;
2. it is belong to steel body PDC reaming bit that made by PDC cutters, steel and tungsten carbide;
3. We slso supply PDC reamer bit with matrix body.

1. PDC arc pillar bit belons to a steel body drill bits. PDC cutters as its cuting element. polycrystalline diamond as its gauge protection. because of fast drilling rate, long service life, and thus the drill bit pick up and put down time is reduced, and it has higher cost-effective;
2. We also supply other PDC drill bits;
3. We accept sample order.

1.PCD core bits are made by 1308 PDC cutters and steel use for cutting softer formations at high penetration rates;
2.They typically have round PCD cutters that can be replaced, extending the life of the bit;
3.We also supply impregnated core bit and tc core bit, tsp core bit, PDC cutter core bit for different formation.

1. C31HD bullet teeth use for trenching and pilling;
2. We also supply C31HD bullet teeth with wear-resistant layer;
3. Except for C31HD teeth, we also supply C21HD, C23, B47K22H, TS30CX etc teeth and suit holder.

1,HQ diamond core bits widely use in geological drilling and water well drilling
2, We can supply diamond core bits from S1-S12 hardness
3, We also supply single tube and triple tube drilling tools

1. T51 retractable drill bits have high efficiency and suit for hard rocks
;2. this T51 drill bit is suitable for Sandvik button bits sizes
;3. We also supply T51 retrac thread button bit for Atlas Copco sizes
4. We also supply R32 T45 T51 GT60 thread and retrac button bits.

1. 38mm 11 degree tapered button bits adopt tungsten carbide tips and 42CrMo to produce
2. Widely used in rock drilling and more mining for hard rocks
3. We also supply taper button bit with 7 degree and 12 degree, and button tips with 4, 5, 6, 8

1. High air pressure DTH bit adopt quality tungsten carbide tips and carbon steel to manufacture
;2. They are wear-resistant and widely used in hole drilling of mining, rock drilling and water well drilling
;3. We also supply thread button bits, taper button bits etc.

1. PDC bits have fast drilling speed in soft and medium hard rock formation
2. We supply PDC bit with 75mm, 94mm, 113mm, 133mm, 153mm, 175mm;
3. We accept sample order and accept customized service.

1.PDC drag bit belongs to steel body non core PDC drill bits
;2. The PDC cutters are cone arranged, this design give the PDC bit a fast footage;
3. Have high effectiveness in soft formation especially suit for large diameter hole drilling.